L'Espace Distanz Ad C/Bocc Mag

Description
Spacer chamber for pre-measured spray.
The use of the spacer chamber is recommended by the international Guidelines for proper asthma therapy.
The spacer is recommended for the proper deposition of the drug in the lower airways, as direct use of the inhaler, given the high velocity of the released drug, would cause the medication to be concentrated in the oropharynx.
The space helps to limit the side effects of oropharyngeal drug deposition and facilitates coordination between the inhalation act and spray delivery.
The space simplifies therapy and ensures more effective treatment with all pre-measured inhalers thanks to adequate dispersal of the nebulized drug in the lower airways.
Cone-shaped form whose flow dynamics make a greater fraction of the drug available, increasing deposition in the lower airways.
Ideal volumetry: The space reduces the reaggregation of nebulized drug particles thanks to its specifically studied volume.
Lamellar bottom: The space is equipped with variable opening lamellae that adapt to the patient’s inhalation force, facilitating therapy.
Anatomical and ergonomic mask that facilitates compliance even for the smallest. Excellent adherence with minimal pressure.
Valve system: the colored valve is a helpful aid for visual control of breathing acts. The movement is clearly visible: it allows correct coordination between drug delivery and inhalation and makes it possible to count respiratory acts.
Bottom with universal fitting for all MDI (Metered Dose Inhalers) pre-measured sprays. All models are sterilizable at 121°C. Low electrostatic charges. Fabric bag for better hygiene and safer transport. Durable and robust materials.
Latex-free.

Usage instructions
1 - before use, carefully examine the product verifying that it is correctly assembled and that there are no foreign objects or missing components. Remove any foreign objects before use;
2 - before use, read the instructions provided with the MDI. Remove the cap from the MDI;
3 - insert the MDI into the bottom;
4 - place the mouthpiece in the mouth and hold it between the lips;
5 - press the MDI and inhale slowly through the mouth. Keep the mouthpiece in the mouth with lips well sealed for at least 5 inhalations after pressing the inhaler. During inhalation, air enters through the openings at the bottom facilitating inhalation of the nebulized drug. Exhaled air exits through the expiration valve;
6 - wait 30 seconds before administering another dose of the drug (repeat steps 4-5), or as directed by the doctor. Only administer one puff of the drug at a time and follow the dosage instructions provided by the doctor.

Cleaning
If the device is used by the same person regularly, clean it as instructed. If used by multiple people, after each use, in addition to cleaning, sterilize in an autoclave at 121°C for 15 minutes. The device can be sterilized up to 20 times without compromising its functional characteristics, after which it should be replaced. For thorough cleaning, boiling or dishwasher washing is also possible.
A - the product should be cleaned following these instructions before first use and then at least once a week: remove bottom and mask;
B - soak the parts for 15 minutes in warm water with neutral disinfectant detergent. Shake gently;
C - rinse with clean water;
D - shake to remove excess water as shown. Do not dry the parts with cloths. Ensure parts are dry before reassembling;
E - reassemble the bottom and the mask when the parts are completely dry and ready for use. Center the alignment arrow on the rear component with the alignment notch on the body as shown.

Warnings
Replace the product if any component is damaged. Some components may be ingested by children due to their size. Do not leave these components unattended. An adult's presence is always necessary. Do not disassemble the product beyond what is indicated in the cleaning instructions. If in doubt about the use of the product, consult a doctor or pharmacist. Clean the product only as instructed to ensure its proper functioning.

Storage
When not in use, store the product in a clean container.
Replace the product after 24 months of continuous use.

Format
1 piece.

Code 471350