Microlife No Contact Nc150

Description
CE Medical Device Class I.
Non-contact thermometer that measures body temperature (and surface temperatures) in just 3 seconds in an hygienic, accurate, and safe manner. Thanks to the luminous pointer, it allows for precise and correct measurement even in the dark. Equipped with Silent Glow Technology, fever alarm (lights up red if the temperature exceeds 37.4 degrees). It is multifunctional as it not only measures body temperature but also surface temperature of objects and the environment.
Clinically tested. Has 30 memories. Backlit display with date and time.
Type: NC 150 Digital Non-Contact Thermometer
Measurement range:
- Body mode: 34.0-42.2°C/93.2-108.0°F
- Object mode: 0-100.0°C/32-212.0°F
Resolution: 0.1°C/°F
Measurement accuracy: ±0.2°C, 36.0~39.0°C / ±0.4°F, 96.8~102.2°F
Operating conditions:
- Body mode: 16-40.0°C/60.8-104.0°F
- Object mode: 5-40.0°C/41-104.0°F

Usage modes
Measuring temperature in body mode
1. Press the ON/OFF button. The display will activate and show all segments for about 1 second.
2. The blinking "°C" or "°F" and a short beep sound will indicate that the thermometer is ready for AK measurement.
3. Aim the thermometer at the center of the forehead at a distance no greater than 5 cm. If the forehead is covered by hair, sweat, or dirt, remove these obstacles to improve measurement accuracy.
4. Press the START button and ensure the blue luminous pointer is aimed at the center of the forehead. After about 3 seconds, a long beep will indicate that the measurement is complete.
5. Read the measured temperature on the display.
Measuring temperature in object mode
1. Follow the steps described above in points 1-2, and aim the thermometer at the center of the object whose temperature you want to know at a distance no greater than 5 cm. Press the START button. After about 3 seconds, a long beep will indicate that the measurement is complete.
2. Read the measured temperature on the display.
Normal body temperature values:
- Axillary: 34.7-37.3°C/94.5-99.1°F
- Oral: 35.5-37.5°C/95.9-99.5°F
- Rectal: 36.6-38.0°C/97.9-100.4°F
- Microlife NC 150: 35.4-37.4°C/95.7-99.3°F

Cleaning and Disinfection
The probe and the thermometer can be cleaned with a slightly damp cotton cloth with alcohol (isopropyl alcohol 70%). Ensure that no liquid penetrates inside the thermometer. Never use abrasive substances like solvents or immerse the thermometer in liquids. Do not scratch the surface or the probe.

Warnings
Follow the instructions for use: read them carefully and keep them. Use the device as described in the manual. Never immerse this device in water or other liquids. For cleaning, follow the instructions in the Cleaning and Disinfection section of the manual. Do not use the device if it is damaged or if anything unusual is observed. Never open the device.
A physiological condition called vasoconstriction can occur in the early stages of fever, causing a so-called "cold skin" effect. The temperature measured on the forehead during this phase can be unusually low. If the measured temperature does not reflect the patient's condition or is unusually low, repeat measurements every 15 minutes, or compare the results with another measurement device. This device is built with delicate components and must be handled with care. Follow storage and operating conditions described in the "Technical specifications" section. Ensure children do not use the device without adult supervision; some parts are small and could be ingested. Do not use the device near strong electromagnetic fields such as mobile phones or radio installations. Maintain a minimum distance of 3.3 m from other devices when using this device.
Protect the device from: extreme temperatures; shocks and falls; contamination and dust; direct sunlight; heat and cold. Remove batteries if the device is not used for an extended period. The measurement obtained with this device does not constitute a diagnosis. It does not replace consultation with your doctor, especially if the result does not match your symptoms. Do not rely solely on the measurement; always consider other symptoms that may appear and the overall condition of the patient. If necessary, call a doctor or ambulance.
Before measurement, patients and the thermometer should remain in the same environment and under the same conditions for at least 30 minutes. Do not measure body temperature during breastfeeding or immediately after. Do not use the thermometer in a very humid environment. The patient should not drink, eat, or exercise before or while measuring their temperature. Do not move the thermometer from the measurement area until hearing the signal indicating the end of the measurement. 10 short acoustic signals (beeps) and the red backlit display will alert the patient if the measured temperature is equal to or higher than 37.5°C: fever alarm. Perform the measurement in the same area as temperature varies depending on the measurement point. Doctors recommend rectal temperature measurement for children from 0 to 6 months because all other methods can give unreliable results. If using this thermometer for children from 0 to 6 months, always also perform a rectal temperature measurement.
In the following situations, it is recommended to take at least three readings, taking the highest as a reference:
1. children under 3 years old with immune system problems where the presence or absence of fever is critical;
2. when the user is learning or does not yet have sufficient experience in using this thermometer or has doubts about the measurements;
3. when measurements are considered too low.
Body temperature measurements in different areas of the body cannot be compared to each other as body temperature varies depending on the measurement point and the time it was taken. Temperature is higher in the evening and lower about an hour before waking up.

Storage
Store at temperatures between -20°C and +50°C, with a maximum relative humidity of 15-95%.

Format
1 piece.
Dimensions: 141.1x43.3x36.9 mm
Weight: 67 g (without batteries)